PVC insulated power cables have good electrical performance and chemical stability.simple structure andconvenient use, suitable for fixed installation on transmission and distribution lines with AC 50Hz and rated voltage olkV and below, Five core power cables are used to separate the neutral and neutral lines in low-voltage distributionsystem engineering to meet the development and safety performance needs of the distribution system, making thesystem operation more stable and ensuring the safety of workers.
Service support
Hotline：
0551-64426668
0551-64320387
Executive standards
本品 按GB/T12706.1-2020设计制造。
阻燃型电缆的阻燃性能符合GB/T19666-2019的要求。
耐火型电缆的耐火特性符合GB/T19666-2019的要求。
低烟低卤阻燃型电缆的发烟量符合GB/T19666-2019的要求。
用途
本产品适用于交流额定电压0.6/1KV 的线路中 .供输、配电能用。阻燃电力电缆适用于要求阻燃的场合。耐火电力电缆适用于高层建筑、大型商场等人口密度地区。需要防火救生的场合。
使用特性及主要技术性能
◆电缆导体长期允许工作温度一般不超过70°C。
◆短路时(最长持续时间不超过5秒)电缆导体的最高温度一般不超过160°℃。◆ 敷设电缆时的环境温度聚氯乙烯护套应不低于0°℃ 聚乙烯护套应不低于- 10℃℃。最小弯曲半径不小于电缆外径的15倍。
◆20°C时导体直流电阻应符合 GB/T3956的规定。
◆工频耐电压试验:3.5kV/5min不击穿。
◆阻燃特性:
-阻燃电缆能经受GB/T19666-2019规定的成束燃烧试验。
-低烟低卤阻燃电缆能经受 GB/T19666-2019规定的成東燃烧试验,且燃烧时烟浓度符合GB/T19666-2019的规定,燃烧析出气体中HCL含量应<100mg/g.并符合GB/T19666-2019的要求。
-耐火电缆能经受 GB/T19666-2019。
0.6/1kV单芯聚氯乙烯绝缘聚氯乙烯或聚乙烯护套电力电缆
0.6/1kV二芯聚氯乙烯绝缘聚氯乙烯或聚乙烯护套电力电缆
0.6/1kV 3-cores, PVC insulation,PVC or PE sheath power cable
0.6/1kV 4-cores, PVC insulation, PVC or PE sheath power cable
0.6/1kV 5-cores, PVC insulation, PVC or PE sheath power cable
0.6/1kV(3+1) cores, PVC insulation, PVC or PE sheath power cable
0.6/1kV(3+2) cores, PVC insulation, PVC or PE sheath power cable
0.6/1kV(4+1) cores, PVC insulation, PVC or PE sheath power cable
0.6/1kV single core, PVc insulation, PVC or PE sheathed steel tape armored power cable
0.6/1kV 2-cores, PVC insulation, PVC or PE sheathed steel tape armored power cable
0.6/1kV 3-cores, PVC insulation, PVC or PE sheathed steel tape armored power cable
0.6/1kV 4-cores, PVC insulation, PVC or PE sheathed steel tape armored power cable
0.6/1kV 5-cores, PVC insulation, PVC or PE sheathed steel tape armored power cable
0.6/1kV(3+1) cores, PVC insulation, PVC or PE sheathed steel tape armored power cable
0.6/1kV(3+2) cores,PVc insulation, PVC or PE sheathed steel tape armored power cable
0.6/1kV(4+1) cores, PVC insulation,PVC or PE sheathed steel tape armored power cable
0.6/1kV 2-cores, PVC insulated, Steel wire armored, PVC sheathed power cable
0.6/1kV 3-cores, PVC insulated, Steel wire armored, PVC sheathed power cable
0.6/1kV 4-cores, PVC insulated, Steel wire anmored, PVC sheathed power cable
0.6/1kV 5-cores, PVC insulated, Steel wire armored, PVC sheathed power cable
0.6/1kV(3+1)-cores, PVc insulated, Steel wire armored, PVC sheathed power cable
0.6/1kV(3+2) cores, PVc insulated, Steel wire armored, PVC sheathed power ca ble
The insulation of cross-linked polyethylene insulated power cables adopts cross-linked polyethylene, which useschemical methods to convert linear molecular polyethylene into cross-linked polyethylene with a three-dimensionalnetwork structure, thereby greatly improving the mechanical properties of polyethylene and maintaining excellentelectrical properties.
PVC insulated power cables have good electrical performance and chemical stability.simple structure andconvenient use, suitable for fixed installation on transmission and distribution lines with AC 50Hz and rated voltage olkV and below, Five core power cables are used to separate the neutral and neutral lines in low-voltage distributionsystem engineering to meet the development and safety performance needs of the distribution system, making thesystem operation more stable and ensuring the safety of workers.
This product is suitable for overhead power lines with a rated voltage of 0.6/1kV and below, and can be used as afixed laying or incoming line. This product is extruded with weather resistant high-density polyethylene and weatherresistant polyvinyl chloride insulation outside tightly pressed copper and aluminum conductors. The cable is safe ancreliable, while also possessing excellent mechanical and electrical properties. Advantages such as resistance to electricatraces, surface discharge, and atmospheric conditions. The cable laying gap is smal, saving line corridors, reducing linevoltage, reducing power supply accidents, and ensuring personal safety. it is suitable for mountainous areas, forest areasmining areas, cities, and other occasions, and is an all-weather cable product.
This product is suitable for overhead power lines with a rated voltage of 10kV and below, and can be used as a fixed layingor incoming line, This product is extruded with weather resistant insulation outside tightly pressed copper and aluminumconductors, ensuring safe and reliable cable performance, while also possessing excellent mechanical and electrical propertiesAdvantages such as resistance to electrical traces, surface discharge, and atmospheric conditions. The cable laying gap is smallsaving line corridors, reducing line voltage, reducing power supply accidents, and ensuring personal safety. lt is suitable formountainous areas, forest areas, mining areas, cities, and other occasions, and is an all-weather cable product.
This product is suitable for power transmission and distribution lines with rated voltage of 10kV and below and certaintensile resistance reguirements, Due to its abilitv to withstand a certain tensile streneth,the instalation spacing can be increasedand the laving and operating environment reguirements are more flexible and convenient.
Purpose: Used in control, monitoring, circuits, and protection circuits with rated voltage of 450/750V and below. TyPe:KVV,KVWP,KVWP2,KVVP22,KVW22,KWWP2-22,KWR,KVWRP,KVW32.etc. Specification:nominal cross-section: 0.75-10mm',number of cable cores: 2-6l cores.
Purpose: Used in control, monitoring circuits, and protection circuits with rated voltage of 450/750V and below. Model:KYJV, KYJVP. KYJVP2、 KYJVP22. KYJV22、 KYJVP2-22、 KYJVR、 KYJVRP, KYJV32. KYJY, KYJYP etc. Specification: nominal section:0.75-10mm 2,Number of cable cores: 2-61
Applicable to 1kv-3kV voltage levels, cable operating temperature of 90'c in dry locations;can be installed verticallyindoors and outdoors, as well as on brackets or along walls;widely used in civil buildings, commercial, industrial, largevenues,entertainment venues,and other applications.
This product is suitable for fixed wiring (laving) of power devices with an AC rated voltage of450/750V and below.thas wide applications in low-voltage power lines, daily electrical, instrumentation, and telecommunications equipment.
lt is used to ensure the uninterrupted operation of fire-fighting power and important equipment such as firepumps,fire elevators, local lighting, emergency evacuation instructions, security monitoring, smoke evacuation systems, andself-contained power supplies in case of fire.